2600k now at 4.8

http://img600.imageshack.us/f/woohoo.png/ if that pic doesnt work its

hey guys its now stable at 4.8 which im glad with a vcore of 1.35 the watercooling system im using is a coolit eco im using real temp to keep a watch on my cpu temps and the max load it has reached is 65c to atleast 70 is that a good sign for a 4.8 clock speed i dont do any programs 2 max my cpu load only prime and im pretty much a gamer

Those temps are fine. It is best to keep that CPU under 70c while under full load.

Do you notice a huge difference playing games?

well coolit aint exactly what u call a really good watercooled system lol but 70c and under impressed and prolly give me like 2 extra frames but thats not about that i mean when the all new powerful card comes u know that ur cpu wont bottleneck at 4.8

all chips are different some are lucky and some are not.. I consider myself lucky 2 reach 4.8 not only with stable vcore and temps but i also have 16gigs of ram and we all know its pretty much hard to overclock with that amount of ram

I am jelly. Mine does not post at anything above 4.6ghz, regardless of any voltages or settings. Max stable is 4.4.JigglyWiggly_

i'm just a bit upset these chips do not go past 5.0. With a Well setup watercooling loop i think they can pas 5g easy :)

[QUOTE="JigglyWiggly_"]I am jelly. Mine does not post at anything above 4.6ghz, regardless of any voltages or settings. Max stable is 4.4.Whiteknight19

[QUOTE="Whiteknight19"]

[QUOTE="JigglyWiggly_"]I am jelly. Mine does not post at anything above 4.6ghz, regardless of any voltages or settings. Max stable is 4.4.JigglyWiggly_

What difference will it make if you offset or set it manually? My const watts is 115, and vdroop is off. For anandtech in the biuos there were quick and ez profiles to oc, they did 4.6 ghz, I can't even do 4.4 ghz with the stock profile. I have to turn vdroop off.

What rev is your cpu?

What difference will it make if you offset or set it manually? My const watts is 115, and vdroop is off. For anandtech in the biuos there were quick and ez profiles to oc, they did 4.6 ghz, I can't even do 4.4 ghz with the stock profile. I have to turn vdroop off.

What rev is your cpu?

JigglyWiggly_

D2 have u got facebook? i talk u through it

What difference will it make if you offset or set it manually? My const watts is 115, and vdroop is off. For anandtech in the biuos there were quick and ez profiles to oc, they did 4.6 ghz, I can't even do 4.4 ghz with the stock profile. I have to turn vdroop off.

What rev is your cpu?

JigglyWiggly_

might be the chip...what board are you running??

[QUOTE="JigglyWiggly_"]

What difference will it make if you offset or set it manually? My const watts is 115, and vdroop is off. For anandtech in the biuos there were quick and ez profiles to oc, they did 4.6 ghz, I can't even do 4.4 ghz with the stock profile. I have to turn vdroop off.

What rev is your cpu?

Whiteknight19

D2 have u got facebook? i talk u through it

AI Overclock Tuner: Manual
BLCK Freq: 100.00
Turbo Ratio: Enabled (All Cores)
By All Cores: 48
Internal PLL OverVoltage: Enabled
Mem Freq: (AS PER YOUR RAM)
EPU Power Saving: Disabled

Load-Line Calibration: High
VRM Freq: Manual Set to 350
Phase Control: Extreme
Duty Contorl: Extreme
CPU Current Capability: 100%
CPU OverVoltage: Offset Mode
CPU Offset: + 0.060 (This may be too low for some people, so either up this to 0.090 or add 0.030 to the Additional Turbo Voltage setting)
DRAM Voltage: (AS PER YOUR RAM)
VCCSA Voltage: Auto
VCCIO Voltage: Auto
CPU PLL Voltage: Auto
PCH Voltage: Auto
CPU Spread Spectrum: Disabled
CPU Ratio: Auto
Intel Adaptive Thermal Monitor: Enabled
Intel Virtualization: Disabled
Intel SpeedStep: Enabled
Turbo Mode: Enabled
CPU C1E, C3, C6: Enabled

i hope this helps

AI Overclock Tuner: Manual
BLCK Freq: 100.00
Turbo Ratio: Enabled (All Cores)
By All Cores: 48
Internal PLL OverVoltage: Enabled
Mem Freq: (AS PER YOUR RAM)
EPU Power Saving: Disabled

Load-Line Calibration: High
VRM Freq: Manual Set to 350
Phase Control: Extreme
Duty Contorl: Extreme
CPU Current Capability: 100%
CPU OverVoltage: Offset Mode
CPU Offset: + 0.060 (This may be too low for some people, so either up this to 0.090 or add 0.030 to the Additional Turbo Voltage setting)

DRAM Voltage: (AS PER YOUR RAM)VCCSA Voltage: Auto
VCCIO Voltage: Auto
CPU PLL Voltage: Auto
PCH Voltage: Auto
CPU Spread Spectrum: Disabled
CPU Ratio: Auto
Intel Adaptive Thermal Monitor: Enabled
Intel Virtualization: Disabled
Intel SpeedStep: Enabled
Turbo Mode: Enabled
CPU C1E, C3, C6: Enabled

i hope this helps

Whiteknight19

mind you my load line is still at regular and the vcore is stable at 1.35

should do lol most boards should have this manual tuning

what motherboard do u have?

what motherboard do u have?

Whiteknight19

should do should be under oc tweaker in ur bio's or its summit 2 do with that update

Almost all my settings are manually entered, as I said, my cpu isn't even stable at 4.4ghz without fine tuning them lol.(AKA auto doesn't cut it)

I am jelly. Mine does not post at anything above 4.6ghz, regardless of any voltages or settings. Max stable is 4.4.JigglyWiggly_

[QUOTE="Whiteknight19"]

what motherboard do u have?

JigglyWiggly_

[QUOTE="JigglyWiggly_"]

[QUOTE="Whiteknight19"]

what motherboard do u have?

Daytona_178

i have a asus sabortooth my load line calibration is set at regular at 4.8 :) i think u should do the same it made my vcore from 1.38 down inbetween 1.34 and 1.35

[QUOTE="JigglyWiggly_"]I am jelly. Mine does not post at anything above 4.6ghz, regardless of any voltages or settings. Max stable is 4.4.Daytona_178

[QUOTE="Daytona_178"][QUOTE="JigglyWiggly_"] Asrock extreme4, 1.50 bios.

Whiteknight19

i have a asus sabortooth my load line calibration is set at regular at 4.8 :) i think u should do the same it made my vcore from 1.38 down inbetween 1.34 and 1.35