First Water Cooling VGA Setup, please check components

Hey guys Im going to install my first ever VGA water Cooling setup. My casea Thermaltake Armor+ Super Tower. My GPUs are two Gigabyte 5830s, please let me know if what I have here is completely compatible and if im missing something. Thanks!

http://order.store.yahoo.net/yhst-39083765508394/cgi-bin/wg-order?yhst-39083765508394+primochill-extremecoolant-32oz-clear

Hey guys Im going to install my first ever VGA water Cooling setup. My casea Thermaltake Armor+ Super Tower. My GPUs are two Gigabyte 5830s, please let me know if what I have here is completely compatible and if im missing something. Thanks!

http://order.store.yahoo.net/yhst-39083765508394/cgi-bin/wg-order?yhst-39083765508394+primochill-extremecoolant-32oz-clear

robertoenrique

the only thing on the list i see is the primochill coolant...

Here you go..

http://www.xoxide.com/thermaltake-aquabay-m5.html

http://www.xoxide.com/koolance-vid-ar587.html (2 of this)

http://www.xoxide.com/swiftech-barb-chrome-fittings-2set.html (2 of this)

http://www.xoxide.com/primoflex-12id-34od-uvblue.html

http://www.xoxide.com/primochill-extremecoolant-32oz-clear.html

Please let me know if im missing something. I think its the radiatior any ideas which one to buy thatll work with this items?

Here you go..

http://www.xoxide.com/thermaltake-aquabay-m5.html

http://www.xoxide.com/koolance-vid-ar587.html (2 of this)

http://www.xoxide.com/swiftech-barb-chrome-fittings-2set.html (2 of this)

http://www.xoxide.com/primoflex-12id-34od-uvblue.html

http://www.xoxide.com/primochill-extremecoolant-32oz-clear.html

Please let me know if im missing something. I think its the radiatior any ideas which one to buy thatll work with this items?

robertoenrique

well you do need a rad but you are only going to loop your cards or the cpu and the gpu's?? also your most likly going to have to mod your case a bit.

[QUOTE="robertoenrique"]

Here you go..

http://www.xoxide.com/thermaltake-aquabay-m5.html

http://www.xoxide.com/koolance-vid-ar587.html (2 of this)

http://www.xoxide.com/swiftech-barb-chrome-fittings-2set.html (2 of this)

http://www.xoxide.com/primoflex-12id-34od-uvblue.html

http://www.xoxide.com/primochill-extremecoolant-32oz-clear.html

Please let me know if im missing something. I think its the radiatior any ideas which one to buy thatll work with this items?

Neo_revolution7

well you do need a rad but you are only going to loop your cards or the cpu and the gpu's?? also your most likly going to have to mod your case a bit.

Its just the GPUs, I already have the Corsair H70 for my CPU. What radiator should I get? Are all the parts I listed compatible (the seem so to me, but Im a watercooling nob lol. )

[QUOTE="Neo_revolution7"]

[QUOTE="robertoenrique"]

Here you go..

http://www.xoxide.com/thermaltake-aquabay-m5.html

http://www.xoxide.com/koolance-vid-ar587.html (2 of this)

http://www.xoxide.com/swiftech-barb-chrome-fittings-2set.html (2 of this)

http://www.xoxide.com/primoflex-12id-34od-uvblue.html

http://www.xoxide.com/primochill-extremecoolant-32oz-clear.html

Please let me know if im missing something. I think its the radiatior any ideas which one to buy thatll work with this items?

robertoenrique

well you do need a rad but you are only going to loop your cards or the cpu and the gpu's?? also your most likly going to have to mod your case a bit.

Its just the GPUs, I already have the Corsair H70 for my CPU. What radiator should I get? Are all the parts I listed compatible (the seem so to me, but Im a watercooling nob lol. )

swiftech and xpc have good rads koolance is another good one but if your going to be watercooling your gpu's you minus well just loop your cpu as well only thing i would say is have a seperate pump for your cpu/gpu.

Yes its only going to be the GPUs so no CPU loop. What kind of mods will I have to make to my case? Thought the Thermaltake Armor+ was Watercooling ready. Also where does theradiator go?On what part of the coolingsystem? Thanks.

Yes its only going to be the GPUs so no CPU loop. What kind of mods will I have to make to my case? Thought the Thermaltake Armor+ was Watercooling ready. Also where does theradiator go?On what part of the coolingsystem? Thanks.

robertoenrique

as far as the rad goes you can install it at the bottom of the case it should fit so i would say get a dual 120mm rad for your goingt o need to get fans also as for the case you might not need to mod it i have been looking at the 800D and its more then enough for the setup i have along with looping my gpu's in a couple of months.

Went for this one

http://www.xoxide.com/koolance-hx-cu1020v.html

ill place it under the top panel of my case of lower panel.

Went for this one

http://www.xoxide.com/koolance-hx-cu1020v.html

ill place it under the top panel of my case of lower panel.

robertoenrique

Went for this one

http://www.xoxide.com/koolance-hx-cu1020v.html

ill place it under the top panel of my case or lower panel. Also I imagine that the plated fittings are same as the nozzles right? Kk thanks.

[QUOTE="robertoenrique"]

Went for this one

http://www.xoxide.com/koolance-hx-cu1020v.html

ill place it under the top panel of my case of lower panel.

robertoenrique

Went for this one

http://www.xoxide.com/koolance-hx-cu1020v.html

ill place it under the top panel of my case or lower panel. Also I imagine that the plated fittings are same as the nozzles right? Kk thanks.

thats an actual good rad to use you will still need fans for it.

[QUOTE="robertoenrique"]

[QUOTE="robertoenrique"]

Went for this one

http://www.xoxide.com/koolance-hx-cu1020v.html

ill place it under the top panel of my case of lower panel.

Went for this one

http://www.xoxide.com/koolance-hx-cu1020v.html

ill place it under the top panel of my case or lower panel. Also I imagine that the plated fittings are same as the nozzles right? Kk thanks.

thats an actual good rad to use you will still need fans for it.

[QUOTE="Neo_revolution7"]

[QUOTE="robertoenrique"]

Went for this one

http://www.xoxide.com/koolance-hx-cu1020v.html

ill place it under the top panel of my case or lower panel. Also I imagine that the plated fittings are same as the nozzles right? Kk thanks.

robertoenrique

thats an actual good rad to use you will still need fans for it.

300 for the kit and some metal clamps didn't want to use the plastic clamps it came with. i already setup my wish list for a better cpu block, triple rad and 3 extra fans.

[QUOTE="robertoenrique"][QUOTE="Neo_revolution7"]

thats an actual good rad to use you will still need fans for it.

300 for the kit and some metal clamps didn't want to use the plastic clamps it came with. i already setup my wish list for a better cpu block, triple rad and 3 extra fans.

i got mine from microcenter but idk if they have any by where you are at check that xenocide site to see if they have the H20 220 edge Ultima+ kit.