x-men origins wolverine problems

YES! I'm using the basic Logitech joystick and everything else works except the up and down buttons are reversed and it won't let me change them (even selecting from the control screen putting forward as "down" and back as "up"). Anyone know what to do???

does it only do that with that joystick? there's no "reverse" x-axis or something in setup?

There is a "reverse axis Y" button but that's only to look up and down..the problem is moving forward and back with the joystick. The keyboard works fine when you reverse the forward and back buttons but they stay the same on the joystick even when you change it.

OK so I figured it out.

1) Go to http://www.filefactory.com/file/agfgedg/n/XinputEmu3_0_zip

2) Dowload the files and put them all in the "binaries" folder of the game

3) edit xbox360cemu.ini to change right stick's config. There's a line

Right Analog X=6 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog Y=-3 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable

swap the numbers (X=6, Y=-3, use "-" to invert if necessasry ), just check what's working with ur gamepad. Had to try few configs by myself before it was ok.

test with XInputTest.exe. When axis are ok during the test it should be ok.

That's it! Works perfectly fine for me with my Logitech controller

have you some more solutions , i have MANTA gamepad , and i really don't know if this xinput program works for me...

have you some more solutions , i have MANTA gamepad , and i really don't know if this xinput program works for me...

gvidzix

ok sorry today i did it , i guess my brain was too tired yesterday, it's kinda hard on my studies these days ...

p.s. thanks it works fine after i did configure these first 4 lines now look like this

Left Analog X=-1 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Left Analog Y=2 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog Y=3 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable
Right Analog X=-6 #axis index; use - to invert; precede with 's' for a slider eg; s-1; 7 to disable

I would just get a xbox 360 controller emulator, it supports the xbox 360 controller just fine so that should do the trick.