help with buddyin ps3 and controllers

eyy i juss recentely got mi ps3 and im getting pretty dam tired of plugging in the charger cord for my controllers everytime i wnna turn one on

can any1 tell me how 2 "buddy" my ps3 and mi controllers???

i cant sumthin pretty mssd up everytime i turn on mi system, i press the ps button for the controller and then the 1,2,3,4 lights just keep blinking and then just stops

i need 2 pair them together lik it says in manual but i dunno how

umm so should i keep the usb cord plugged in when the ps3 is turned off and i turn on my controller?richboyy

Wow this isn't rocket science. Follow these exactly and don't go skipping steps. DON'T GET AHEAD OF YOURSELF! READ!

1. Controller>USB>PS3

2. Turn on PS3

3. Turn on Controller

4. The light should blink, then go solid.

5. You may now unplug the USB and the controller will be assigned to that PS3 PERMANTELY unless you assign it to a different PS3. You do not need to do this everytime to turn on the PS3. Once it is assigned, it is Done, THATS IT!

_____________________________________________________________________

Turning on the PS3 AFTER the controller is paired:

1. Press the PS button on the Controller, Your PS3 will beep and turn on. The controller will assign itself a slot (The 1 light should be solid if that is the only controller on).

OR

1. Turn on the PS3.

2. Turn on a Controller. The controller will assign a slot.

I hope this helps - this should be in the manual too. I didn't think it was that hard to figure out anyways. Well it didn't even take any figuring out on my part, I just knew when I got it... I dunno, maybe just me. :lol:

The only time you will need to plug in the controller again is to charge the controller. Plug the controller into the PS3 while it is on. The lights on the controller will flash as it is charging.