I just purchased a 360 and love it, butI'm very nervous about it overheating and getting the "3 red lights". I came up with an idea that seems to help a little, without voiding your warrenty and is very simple.
I pickup some 1/2" Diameter plastic spacers w/adhesive on one side, typically used for the bottom of furniture and stuff. If you notice on the rear of all electronic compontents they have built in spacers at all four cornersthat raise the unit above the surface. I read this is typically used to allow the hot air to flow.
Iplaced the spacerson the rear of the 360, raising it higher off the floor (seems like the existing design does not keep the 360 off the floor high enough). By doing this it increased the air flow and it seems to not run as hot!!. I even did it to the power supply and it's seems to help also.
I really think eveyone should try this..it does seem to help and the spacers cost like $2.00. Let me know what you think.
Log in to comment