is it possible to clean the inside of an xbox 360 controller without breaking it. or even reajusting buttons that are sticking and not responding.srl2cool
Well, personally I wouldn't try it. I would just buy a new controller. But google is your friend. :)
As long as you have the right screwdriver you should be fine.
From what I've seen of taking other controllers apart in the past is, just be carefull all the buttons and insides don't just fall out everywhere when you open it (sometimes it can be tricky to put everythig back in the right place)
Also, be carefull not to pull any small cables that go between the two halfs.
As long as you have the right screwdriver you should be fine.
From what I've seen of taking other controllers apart in the past is, just be carefull all the buttons and insides don't just fall out everywhere when you open it (sometimes it can be tricky to put everythig back in the right place)
Also, be carefull not to pull any small cables that go between the two halfs.
Just have the right screwdriver, a can of compressed air or a camera, you should do fine. The camera is for taking pics of the controller's insides before you take anything out. That way you can have a guide for putting them back again in case you accidentally spill the controller's guts out. ;)
a place like Sears or Autozone should have every possible screwdriver you need. and there are several websites ive seen that sell the bits used to open consoles (like the old segas and nintendos).
Log in to comment