Does anybody know any way to clean a 360 from the inside?Does a vaccum cleaner work?Or is there any way to open it?Because i've looked everywhere for screws but I cant see anything?Help plz
I just cleaned my 360. Mine is an origianl launch unit! NEver broken, but since my warranty was up, I figured I would clean it. You need to make the little plastic clip openers for the back.... or I can sell you mine, they actually were a little hard, just be careful with the exacto knife. BUt if you really take your time and follow the tutorials, you CAN get it opne without making any marks what so ever. There is one little rubber foot you need to remove, and then glue/stick back on. A long skinny screw driver helps, but really look around for detialed instructions with good pics. Anyway, it is totaly worht it if you are carefull. I cleaned mine out with compressed air (never turn upside down or extreme angle or you'll freeze your board) and my 360 works much better. The biggest difference is that it is QUIET again! :-)
Well my warranty has expired,my 360 wont read disks, I got nothing to lose by dissasembling it, ill problaly just buy a new one if the lens dont read the disks
Well my warranty has expired,my 360 wont read disks, I got nothing to lose by dissasembling it, ill problaly just buy a new one if the lens dont read the disksPapaSmurf831
your prob is very simple as drinking water.
look DO NOT USE WATER on your optic because you will kiss it goodbye if you do that.
to clean the lens first get an ear cleaner cotton and spoil a side with alcohol and leave the other dry then press by your fingers on the spoiled side of the ear cotton till a just little of alcohol lift to clean it(if you dont do that you are risking to spoil the alcohol on the lens when you clean it) after that gently and very gently clean the driver lens then dry it by the dry side of the ear cleaner.
i used to that on my ps2 once a month and it always works.
okay i am sorry but you should tell whoever told you that is dumb cause if you use canned air or anythin high pressured cause it will **** everything up you have a better chance of not ****in it up by taking it apart and its not that hard
Log in to comment