Bozanimal's forum posts

Avatar image for Bozanimal
Bozanimal

2500

Forum Posts

0

Wiki Points

594

Followers

Reviews: 68

User Lists: 0

#1 Bozanimal
Member since 2003 • 2500 Posts

I'm glad you're familiarizing yourself with the settings, and have gotten you volume controls, er, under control!

To follow-up, you are unlikely to be adjusting your volume frequently. I imagine you'll find a volume you're comfortable with and know where to set it before switching to your XBox. That said, if you do find you need on-the-fly volume control, and external control is cheap and easily available (like this girl I once dated).

If your headphones are broken, take a look in the sticky for whatever fits in your budget.

If you have any further questions, come on back. Helping is its own reward.

Happy gaming,

Boz

Avatar image for Bozanimal
Bozanimal

2500

Forum Posts

0

Wiki Points

594

Followers

Reviews: 68

User Lists: 0

#2 Bozanimal
Member since 2003 • 2500 Posts

Yes they are but they Boz assumes they are out of your budget as you'll need to buy a mic to attach to the cord of the headphones (e.g. zalman clip-on)

The M50s will definitely sound better in music and have MUCH deeper bass. If that's worth the extra money (About 35 dollars more) then go for M50.Mozelleple112

Yes to all.
I see I see, thank you I really apprieciate the help. If I ever ran out of budget or something I'll pick the ATH-AD700.

I more question, If I bought a Labtec LVA7330, DO I just need to put it on my headset?_VenomX

The mod basically requires you detach the boom from the headset that comes with the Labtec LVA7330 and attach it to your headphones with something like Velcro. You can see an image of the mod here. You can also Google it for more detail.

I recommend velcro because I'm not a fan of permanent mods (i.e. super glue or epoxy). When you want to use the headphones for travel or a movie in private, you've got a boom stuck on the side.

Good luck!

Boz

Avatar image for Bozanimal
Bozanimal

2500

Forum Posts

0

Wiki Points

594

Followers

Reviews: 68

User Lists: 0

#3 Bozanimal
Member since 2003 • 2500 Posts

TheAudio Technica ATH-AD700 is probably closer to your budget once you factor in the cost of a microphone. Check out the recommendations in the sticky and weigh the pros and cons of various designs in your price range.

As for mics, there are two viable options:

  1. Zalman ZM-Mic1 (inexpensive, easy, good quality)
  2. Labtec LVA7330 (more expensive, requires minor modifications, higher quality; EBay, baby!)

Each has pros and cons, though if you're Skyping with friends and family a lot the boom mic will work better.

Just be sure to factor it into your budget.

Happy gaming,

Boz

Avatar image for Bozanimal
Bozanimal

2500

Forum Posts

0

Wiki Points

594

Followers

Reviews: 68

User Lists: 0

#4 Bozanimal
Member since 2003 • 2500 Posts

None of the images I have hosted on Gamespot are displaying, including my avatar.

Happy gaming,

Boz

Avatar image for Bozanimal
Bozanimal

2500

Forum Posts

0

Wiki Points

594

Followers

Reviews: 68

User Lists: 0

#5 Bozanimal
Member since 2003 • 2500 Posts

Allow me to summarize, and correct me if I'm wrong: Your speakers work fine, but the audio output on the front panel of your PC seems to be too quiet when you plug in your earbuds.


I am inclined to believe you have a software issue. Even the least expensive motherboard (mobo) chipset will still blow your ears out if you have earbuds plugged into the 3.5mm audio output and the volume maxxed out.

The front and rear 3.5mm audio output is identical. It is sending a low-wattage audio signal to either your headphones or speakers. If you plugged your speakers into the front jack, you should have the same result as you do now with them plugged into the rear jack. The reason plugging headphones into the front jack disables the rear is because, by design, the mobo is designed to assume front-audio jacks take priority. The same actual holds true for home stereos, too. When I plug headphones into my Yamaha receiver, it disables the speaker outputs.

Just for giggles, try unplugging your speakers and plugging your earbuds directly into the audio jack on the rear of your PC and seeing if the volume remains too low. If it works in the rear jack but is still quiet in the front jack, it could be a loose mobo wire (the wire connecting the mobo chipset to the front port). It could still also be a software issue.

Make sure that you have gone into Control Panel and adjusted the audio settings. Check for any third-party software that may also affect the audio settings. Sometimes you can have the Volume cranked up, but the "WAV" volume is turned down, and so you get very little volume.

Also, if you have not already determined your sound card model, do so. For example, my previous Gigabyte mobo was the GA-P35-DS3R, which uses a Realtek ALC889A audio chipset. You may also have a seperate sound card, though this is less likely. You should determine your chipset or sound card model so that you can download the most updated drivers, which may include a hardware fix. Updated drivers also often contain better audio controls than the default windows controls.

Here is one of the two questions I had. From what I understand, the desktop speakers I have possess their own drivers...Chaay
This is actually unlikely. Most PC speakers simply amplify the audio output of your card. Unless they plug into a USB outlet or use your SPDIF output (which I do not believe they do in this instance), they are unlikely to have software drivers. If you provide your speaker model I can better assist.
I have my Xbox 360 plugged into the line-in port via an HD AV cable, and my speakers in that green audio port. So I think it's impossible for me to add 3.5mm headphones because I have no ports left, right?Chaay
Ideally we want to try to use that front-panel headphone output. This will give you access to a wider range of quality headphones, and you'll be able to use those headphones with more devices (e.g. your mp3 players, DS, etc.). If we cannot get your headphone jack working, depending on your budget we can either:

  1. Get a new sound card and install it inside your PC (likely no feasible since yours is on loan)
  2. Get a USB soundcard (easy, inexpensive)
  3. Get a USB headset (least desirable, typically low quality)

I have more feedback, but start with this, and come back with details. Honestly I'm hoping you'll be able to plug your headphones into the front jack, fiddle with the volume control settings, and get it working.

Happy gaming,

Boz

Avatar image for Bozanimal
Bozanimal

2500

Forum Posts

0

Wiki Points

594

Followers

Reviews: 68

User Lists: 0

#6 Bozanimal
Member since 2003 • 2500 Posts

Did you call Shure?

Boz

Avatar image for Bozanimal
Bozanimal

2500

Forum Posts

0

Wiki Points

594

Followers

Reviews: 68

User Lists: 0

#7 Bozanimal
Member since 2003 • 2500 Posts

Server Name: Pwniez Galore!
Server IP: 206.220.173.246:27015
Map Name: de_aztec
Number of players: 24 playersSynthia
Details added to the original post.

I will not be in attendance, but I hope you all have an excellent time!

Happy gaming,

Boz

Avatar image for Bozanimal
Bozanimal

2500

Forum Posts

0

Wiki Points

594

Followers

Reviews: 68

User Lists: 0

#8 Bozanimal
Member since 2003 • 2500 Posts

Grats: They're amazing looking headphones. I think you made the right call over the DT770s.

Boz

Avatar image for Bozanimal
Bozanimal

2500

Forum Posts

0

Wiki Points

594

Followers

Reviews: 68

User Lists: 0

#9 Bozanimal
Member since 2003 • 2500 Posts

...plug the audio jacks into an adapter which goes into the line-in port on the back of my desktop tower. My speakers plug into the audio port on the back of my desktop tower. I'm not audio savvy, but I think that the computer speakers I have (two of them that sit on either side of the computer) draw power from the sound card in my desktop tower.Chaay
There are a number of things that could be happening here, but let's start with some follow-up questions:

  1. Do your computer speakers require an external power source, meaning do they have a plug that goes into the wall or require batteries? If not (i.e. they do not turn on in any way), they run off the power of your PC's speaker output jack.
  2. Does your computer have a front-panel audio output jack? If you don't see one, look around for a small panel; most PCs made in the past five years have some form of front-panel jack. It is typically marked, though not always, with a green ring. If you have a front-panel jack (a 3.5mm jack), you can plug a pair of regular headphones into that jack directly; that's what it was meant for, really. Grab a pair of headphones - any headphones - and test to see if it works. When you plug your headphones into the front audio jack it should automatically disable the PC speakers. Report back; if you do not have a front-panel jack, reply accordingly and move on to the next question!
  3. Do you require a microphone, meaning a headset with a mic built-in? Generally if you are using this kind of setup your PC microphone jack will not communicate with your XBox360, and you'll have to jack into the XBox360 directly regardless.

So I "think" my question is: If I purchase the X11 Turtle Beaches (or any USB Headphones) to use for my Xbox 360 and PC, will they work properly?Chaay
The Turtle Beach software should disable your speakers when the headphones are plugged in. If they do not, you can go into the default Windows "Volume Control" and adjust your PC Speaker output. Just go into "Options," then "Properties," and enable the check box for "PC Speaker." This will allow you to adjust its volume independently.
Because I imagine the headphones would draw power from the computer speakers which draw power from the sound card, and I don't think there's enough audio ports on the computer to accomplish that. But I might just be confused and I don't even need the computer speakers plugged in; I just need to make sure I am not using the default sound card only as it is way too quiet.Chaay
You will not hurt your PC plugging lots of PC speakers into the various jacks; it's actually quite difficult to hurt a PC by plugging something into the wrong jack, since each plug on a PC is designed for a specific purpose. A power cable from the PSU will not go into a SATA plug which will not go into an IDE slot which will not attach to a Power On header; so no worries, there.

I think that's enough for now.

Good luck,

Boz

Avatar image for Bozanimal
Bozanimal

2500

Forum Posts

0

Wiki Points

594

Followers

Reviews: 68

User Lists: 0

#10 Bozanimal
Member since 2003 • 2500 Posts
Ok sorry XDWorldDman97
No need to apologize! I hope you find the information helpful. Happy gaming, Boz