So the Ath 4000+ is broken in. It's stable, fun, and just slightly slower out of the gate than my old proc was after overclocking.

This has overclocked very nicely so far. I'm now running at 2.82GHz, 5xHT, DDR400 running at DDR470 @ 2-3-3-5-1T

I've gotten 2.9GHz to boot but either the CPU or the HT isn't stable. The CPU is running on auto-voltage. Currently it's at 1.47. It's a little high. I'm going to back it off and see if that brings the temp down a little on the CPU (45c). It may bring some stability if I have heat induced failure. However if my CPU is failing due to not enough voltage then it should make for some really ugly crashes.

Memory is running at 2.85V and is very stable up to just under 2.9GHz. I've got enough room to go to 2.9V but thats the end. I'm likely better off dropping my timings down a little or reducing the HT.

Guess we'll see. Personally, I'm loving the extra speed.