my pc performs bad :(

Hi as you maybe know i had an old system which was running terrible so i bought a hole new system and im very pissed because this system is performing even worse...

Now i think that is me causing the problem because it sounds strange that i get the same problem as before..

My fps in games is lower than they should be and im getting big performance drop so i dont want to play until ive solved the problem and you really need to help me :(

Specs:

Asus p5q

E8500 3.16 ghz

4 GB corsair 1066 mhz

Club 3d 4850

650 watt caorsair

lots of cooling

And for example in crysis im getting on 1440x900 high, no aa 22 as avg and my friend has also built a new system same gfx but slower cpu and he is getting CONSTANTLY 40 fps on 1280x1024 and i have also tried that res but taht didnt helped :(

So plz help me i will be very happy if you can solve this problem for me

yes i have the newest and i have tried all the drivers without luck

11800 i think with standard settings? how many do you get? and plz tell me your system

11800 i think with standard settings? how many do you get? and plz tell me your system

N00bZsTeR

I get 10666 with a 4850, E7200, and 4 gigs of DDR2. Your scores seem fine to me.

but i games i get very big fps drops do you also?N00bZsTeR

Only in Crysis and Team Fortress 2 really

What about call of duty 4? wich settings do you play games at?

-Download gpu-z and tell me what the Bus interface is, it should be x16.
-Remove the catalyst drivers, reboot, use Driver Sweeper to remove the leftover drivers. Install 8.7.
-Borrow your friend's card and try it on your pc.

It could be a defective card.

I have GPU-Z and the bus interface is 2.0 pci express x16 i also tried removed the drivers with driver sweeper and installed 8.7 again but without luck.. I have tried his card in my pc earlier and it was runnig bout the same no difference... So then we could be sure that it must be something with some settings i have wrong in the bios or maybe in windows?

Hard to say what the problem is. Run Memtest to check your RAM.

And maybe update your motherboard's bios.
I would try 0703.
http://support.asus.com/download/download.aspx?SLanguage=en-us&model=P5Q

Did you install the chipset drivers ?

9.0.0.1009 under Chipset, choose your OS:

http://support.asus.com/download/download.aspx?SLanguage=en-us&model=P5Q

What about call of duty 4? wich settings do you play games at?

N00bZsTeR

I play CoD4 at 1680x1050 with everything maxed and it doesn't usually go below 40 fps. The average is probably around 80.

why? the new ones is the best aint?

Why not the newest bios i have 1004? i think its named that... But it sound strange that maxishine gets 40-130 fps in 2560x1600? and im getting the same in 1440x900 something is totaly wrong here? I try run memtest nowN00bZsTeR

You watch maxishine videos ?They realy suck at hardware reviews,They keep making a mistake after the other and at 2560 x 1600 not even an x2 can get 40-130 fps in crysis

every time i play crysis and a korean is shooting at me the fps drops 10 fps so 30-10=20 fps and if there is many then its running 10-15 fps and it drives me crazy.

every time i play crysis and a korean is shooting at me the fps drops 10 fps so 30-10=20 fps and if there is many then its running 10-15 fps and it drives me crazy.

N00bZsTeR

Have you installed the chipset drivers or not ? See my previous post.

every time i play crysis and a korean is shooting at me the fps drops 10 fps so 30-10=20 fps and if there is many then its running 10-15 fps and it drives me crazy.

N00bZsTeR

The korean guns are very powerful lol

[QUOTE="N00bZsTeR"]

11800 i think with standard settings? how many do you get? and plz tell me your system

bungie93

I get 10666 with a 4850, E7200, and 4 gigs of DDR2. Your scores seem fine to me.

[QUOTE="N00bZsTeR"]

11800 i think with standard settings? how many do you get? and plz tell me your system

bungie93

I get 10666 with a 4850, E7200, and 4 gigs of DDR2. Your scores seem fine to me.

I break 12K with my system, and an HD4850>9600GT.

[QUOTE="bungie93"][QUOTE="N00bZsTeR"]

11800 i think with standard settings? how many do you get? and plz tell me your system

JSDempsey

I get 10666 with a 4850, E7200, and 4 gigs of DDR2. Your scores seem fine to me.

I break 12K with my system, and an HD4850>9600GT.

11800 i think with standard settings? how many do you get? and plz tell me your system

N00bZsTeR

With my system (Q6600 @ 2.4GHZ, 2900XT, 2GB Ram @800MHZ and Vista Ultimate) im getting around 11600

hi again i have installed the newest chipset driver i wierd istallation it was only for the usb i and it didnt required a reboot but i have maked a video where you can see the problem.. i upload it now and give you the link so plz see it

http://img99.imageshack.us/my.php?image=nytbilledeji2.png

Here is a screenshot from my desktop.. As you can see does CCC says that memory bandwich is 59 gb/s but gpu-z says 63 gb/s why?

What settings and resolution are you playing with?

EDIT: Just read first post again. From what I've heard (my HD 4850 has yet to arrive), you should be getting much better frames. Are you sure you aren't running with AA enabled? Or perhaps you're running with VSync but you didn't enable Triple Buffering?

i have tried looking in the bios but i cant find harddrive cache... where can i change it?N00bZsTeR

And i forgot to say yeah my harddrive is running udma 5

Ahhhh... let me see now.... Right click on MyComputer, Properties, Advanced, Performance/Settings, Advanced, Virtual Memory/Change. Select Custom Size then set figure to 4092 for initial and 4092 for maximum. Hope this helps you. Other things can be viruses doing **** in the background. Do full system scan, if you havent done already.

use lower settings thats all you don't really have to make a big deal of thatfima1fim

He just said he gets 30-50FPS on LOW at 800x600 :?

I just installed windows for a few days ago so i dont think it helps to reformating... But i set the cach size and i ran a becnhmark the GPu benchamrk in crysis DX10 64 bit very high, no aa, 1440x900 and i was getting an avg of 22.78 in the second run does this sounds normal? I still think i can get a bit more if all the things are loaded and not just pop up when i walk... I can walk and then a meter in fornt of me is justing comming a stone... and then the fps drops because it should load and that happens again again again and again... What could that be? Thx for all the answers they have been very usefull

Have you bought your computer/parts recently?bakalhau90

Which is to ask, is the computer/hard drive under warranty?