This topic is locked from further discussion.
You remembered to connect all of the necessary PSU connectors to it and your PSU is strong enough to power it right? If so, remove the card and reinstall it (making sure the monitor connector is secure). If you still get no video, you may have a DOA card. RMA it. It would help to know all your specs.
Put your old graphics card in. If it works, then maybe your pc can't handle your new graphics card or maybe it's just faulty. If i doesn't work well, I don't know.
You sound pretty inexperienced with computers ... I hope you didn't static shock it or otherwise damage it :(
I had this same problem when i left the evil nvidia empire for ATi. What happened is not all of the old driver components uninstalled, so i put the old card back in (it ran at low res) found the leftover components and then removed them. After my new card was up and working i had some flickering issues so i updated my drivers and deleted catalyst control center
Go into your bios, and change onboard graphics to auto or off.tab132This is the most likely problem. Take the card out, enter your bios, and find the setting to use your PCI-E slot as your primary video card option...
so if i damaged it would it have shocked me as well? cuz if thats the case no i didnt static shock it.mrred85I remember when Tech TV, may it rest in peace, tested this misconception. According to their tests, static electricity is in no way strong enough to damage pc components...
"so if i damaged it would it have shocked me as well? cuz if thats the case no i didnt static shock it."
The amount of static that it takes to kill a motherboard or other component is one hundredths of what you get from, say, going down a slide in the winter. If you did shock your computer, you most likely would not have felt it or seen it.
When you're working on your PC you're supposed to ground yourself by wearing a special bracelet that plugs-in to an outlet
"According to their tests, static electricity is in no way strong enough to damage pc components..."
Then they're absolutely retarded since I've worked on and know people who repaired and built PCs and they will attest to the fact that static can and dos kill PC parts.
and i think i did it correctly all i did was remove old one and replace with a new one. then when i restarted again it did same thing jus load up but black screen.mrred85Did you uninstall the drivers for the old card before you removed it and installed the new card? If you did, did you install the drivers for the new card?
I've been repairing and building pc's for almost 20 years. Static electricity never killed one of my components. I've shocked components, and even grounded a shorted out motherboard (with much higher voltages) to components by accident. Still worked... For now, I'll trust my own experiences and TechTV. But if you've got any evidence to the contrary, I'll be glad to see it. Maybe we got lucky..."According to their tests, static electricity is in no way strong enough to damage pc components..."
Then they're absolutely retarded since I've worked on and know people who repaired and built PCs and they will attest to the fact that static can and dos kill PC parts.
DeckardLee
[QUOTE="DeckardLee"]I've been repairing and building pc's for almost 20 years. Static electricity never killed one of my components. I've shocked components, and even grounded a shorted out motherboard (with much higher voltages) to components by accident. Still worked... For now, I'll trust my own experiences and TechTV. But if you've got any evidence to the contrary, I'll be glad to see it. Maybe we got lucky..."According to their tests, static electricity is in no way strong enough to damage pc components..."
Then they're absolutely retarded since I've worked on and know people who repaired and built PCs and they will attest to the fact that static can and dos kill PC parts.
-GeordiLaForge-
Can you be 100% certain? While I personally have never had static kill a component, that I know of, I would not say it is not possible.
If it was not possible, then why do the manufactures go through such great links to protect aginst it?
I feel people over worry about static, but I definatly feel it is something worth taking precaution with.
I've been repairing and building pc's for almost 20 years. Static electricity never killed one of my components. I've shocked components, and even grounded a shorted out motherboard (with much higher voltages) to components by accident. Still worked... For now, I'll trust my own experiences and TechTV. But if you've got any evidence to the contrary, I'll be glad to see it. Maybe we got lucky...[QUOTE="-GeordiLaForge-"][QUOTE="DeckardLee"]
"According to their tests, static electricity is in no way strong enough to damage pc components..."
Then they're absolutely retarded since I've worked on and know people who repaired and built PCs and they will attest to the fact that static can and dos kill PC parts.
opamando
Can you be 100% certain? While I personally have never had static kill a component, that I know of, I would not say it is not possible.
If it was not possible, then why do the manufactures go through such great links to protect aginst it?
I feel people over worry about static, but I definatly feel it is something worth taking precaution with.
Our car has shocked me much more intensely than any pc component. So I guess that there is a remote possibility. But I don't worry about it. I've got plenty of old pc parts though, so I may do a test of my own. All that I would need is a series of resistors and a power supply. If anyone has an assortment of resistors on hand, feel free to experiment...."I feel people over worry about static, but I definatly feel it is something worth taking precaution with."
My sentiments exactly.
As far as proof of what I say .. What could I possibly give you over the internet?
I outlined a way to test the theory, but google offered up plenty of sites claiming to know for sure that static electricity can damage electronics...."I feel people over worry about static, but I definatly feel it is something worth taking precaution with."
My sentiments exactly.
As far as proof of what I say .. What could I possibly give you over the internet?
DeckardLee
Please Log In to post.
Log in to comment